
With the widespread application of ultrasonic welding technology in industries such as automotive, electronics, and medical devices, issues such as surface scratches, indentations, joint fractures, and internal cracks have become increasingly prominent. These defects not only severely affect product appearance but also weaken structural strength, leading to higher batch defect rates. The root cause lies in the uneven transmission of ultrasonic vibration energy to the weld surface, resulting in abnormal accumulation of energy or stress concentration in non-welded areas.
There are five primary root causes:
First, insufficient precision in ultrasonic mold manufacturing results in poor contact between the working surface and the product, leading to localized energy concentration that causes burns and uneven stress distribution;
Second, inconsistent molding quality of plastic products-such as injection molding deformation, shrinkage, or significant dimensional errors in multi-cavity molds-causes uneven force and heat distribution during welding;
Third, unreasonable process parameter settings, such as excessive welding time, excessive pressure, or improper delay and hold times;
Fourth, coatings on the product surface-such as paint, UV coatings, or electroplated layers-impede energy transfer, leading to localized heat buildup;
Fifth, structural design flaws in the products, such as thin walls, sharp corners, right-angle transitions, and slender cylinders, are prone to stress concentration and subsequent fracture.
Targeted Solutions:
Re-machine the mold to ensure a fitting tolerance of ≤0.05 mm, and perform nitriding or chrome plating hardening on the welding head's working surface;
Optimize the injection molding process and screen out parts with deformation or dimensional deviations;
Adjust process parameters by appropriately reducing welding pressure, shortening welding time, and optimizing delay and hold times;
Place a PE film between the welding head and the product to act as a barrier; apply silicone rubber padding to areas prone to vibration-induced cracking;
Replace right-angle transitions with rounded corners (R ≥ 0.5 mm) and increase the wall thickness of vulnerable areas.
Key preventive measures: Establish standardized process procedures based on material and structure; regularly inspect mold wear and repair or replace as needed; periodically calibrate the output power of the ultrasonic generator; conduct a first-piece test weld before mass production and confirm the absence of defects before proceeding.




